AFBR-1013
Fiber Optic Transmitter for 50 MBaud MOST
描述
AFBR-1013 Transmitter are designed to transmit up to 25MBit/s optical data which are biphase coded (up to 50Mbaud). They are packaged in 4-pin transfer molded, low-cost packages ready for assembly into MOST® plastic fiber optic connector receptacles.
The transmitter utilizes a 650 nm LED source with integrated optics for efficient coupling into 1mm Polymer Optical Fiber (POF).
Input data has TTL switching levels, compatible with MOST® Network Interface Controller ICs.
This optical components are specified for operation over a -40°C to +95°C temperature range, and reliability requirements of automotive applications.
It is allowed to process the AFBR-1013 devices with reflow soldering.
The transmitter utilizes a 650 nm LED source with integrated optics for efficient coupling into 1mm Polymer Optical Fiber (POF).
Input data has TTL switching levels, compatible with MOST® Network Interface Controller ICs.
This optical components are specified for operation over a -40°C to +95°C temperature range, and reliability requirements of automotive applications.
It is allowed to process the AFBR-1013 devices with reflow soldering.
特點
- Solderable with refl ow process acc. JEDEC standard J-STD-020D
- Operating @ 3.3V or 5V (+/-5% each) Power supply
- Operating temperature range -40°C to +95°C
- TTL Data Input (Logic to Light Function)
- Power down mode
- Duty Cycle Adjust (DCA), yields to enhanced SP1 inputrange
- 650nm for working in a low attenuation range of PMMA Fiber
- Fully compliant to “MOST® Specifi cation of Physical Layer Rev 1.1”
- RoHS compliant (Lead free and halogen free)
- Lead is flash gold
- Low power consumption
- Photo current sensing, network activity detection and Low Power Mode (ICC < 10μA)
- Additional Low Power Mode (ICC < 15μA) for the transmitter when SP1 input is low
- Signal detect and Status Output
- Pulse width control
應用
Optical transmitter for MOST® 50 MBaud systems
